SEAV Be Happy RH1 Gate Remote Control Transmitter Key Fob

SEAV BE HAPPY RH1 Gate Remote Control Transmitter Key Fob

The SEAV BE HAPPY RH1 pale blue (translucent) remote suitable for SEAV gate automation systems, for control of automated gates or garage doors on the 433MHz frequency. It is easily programmed from an existing remote or from the control board. The unit is supplied  with easy to follow instructions and can be programmed in less than 30 seconds.

 

• Number of channels: 1
• Frequency: 868.3 MHz
• Coding: Rolling code
• Type of programming: Programming with receiver
• Number of switches: 0
• Power supply: 3V DC, battery type: cr2032
• Operating temperature: -20°C +55°C
• Range: from 50 m to 100 m outside; up to 35 m inside
• Dimensions: 65x16x33 mm
• Weight: 20 g
• Handset identification:- Single button (Pale Blue) in translucent blue casing. SEAV "Be Happy RS1" on reverse of casing

The unit is supplied complete with batteries. Should you need any help with programming we have access to all the SEAV manuals and will send out a PDF if required.

Warning please note.  SEAV manufacture two similar versions of the remote. Make sure you are purchasing the correct version for your installation.
BE HAPPY H1 with a blue casing and dip switch programming (fixed code).
BE HAPPY RH1with a blue casing and without dip switch programming (rolling code).
The two are not compatible.  Please make sure you purchase the correct remote control. to be certain open you remote and look inside for a bank of small switches.

The SEAV RH1 is not compatible with the SEAV RS1, RS2, RS3 433mhz fixed code or the S1, or S3, S3 433mhz fixed code remotes.

BE HAPPY RH1

---