SEAV Be Happy S3 Gate Remote Control Transmitter Key Fob

SEAV BE HAPPY S3 Gate Remote Control Transmitter Key Fob

The SEAV BE HAPPY S3 pale blue (translucent) remote suitable for SEAV gate automation systems, for control of automated gates or garage doors on the 433MHz frequency. It is easily programmed from an existing remote or from the control board. The unit is supplied  with easy to follow instructions and can be programmed in less than 30 seconds.

• Number of channels: 3
• Frequency: 433,92 MHz
• Coding: 12 bit fixed code
• Type of programming: switch
• Number of switches: 10
• Power supply: 3V DC, battery type: cr2032
• Operating temperature: -20°C +55°C
• Range: from 50 m to 100 m outside; up to 35 m inside
• Dimensions: 65x16x33 mm
• Weight: 20 g
• Handset identification:- Single button (Pale Blue) in translucent blue casing. SEAV "Be Happy S3" on reverse of casing

To code these transmitters to match an existing transmitter simply squeeze a small flat headed screwdriver into the small recess at the base of the transmitters and twist the screwdriver to pop the top cover off. You will see a row of 10 small dip switches at the base - which will be either up or down - match the new dip switches to the same positions as the existing transmitter and replace the covers.

The unit is supplied complete with batteries. Should you need any help with programming we have access to all the SEAV manuals and will send out a PDF if required.

Warning please note.  SEAV manufacture two similiar versions of the Nice remote. Make sure you are purchasing the correct version for your installation.
BE HAPPY S3 with a blue casing and dip switch programming (fixed code).
BE HAPPY RS3with a blue casing and without dip switch programming (rolling code).
The two are not compatible.  Please make sure you purchase the correct remote control. to be certain open you remote and look inside for a bank of small switches.

BE HAPPY S3

---